Anything else is just another "STICK IN THE MUD" Update: As of March 26, 2007, a new batch of push pole blanks have been received and are ready to into production for the push pole of your design. These are the best composite material and the latest technolagy available to the push pose market. Give me a call. Mikel D	The Best Push Pole You Ever Put In Your Hands	16ft. Helmsman Push Pole mounted on a 1780 Polar skiff, ready for fishing or travel.	16ft. Helmsman Push Pole mounted on a 1780 Polar skiff, ready for fishing or travel.
Helmsman Push Pole mounted on an exiting deck cleat.	Helmsman Push Pole mounted on a SS "U" stlye"DRIFT MASTER ROD HOLDER". "C" stlye holder also available.	The Push Pole end, (the YOKE) The YOKE is made of 6061-T65 Aluminum-- Hi Tech interference fit machining, all TIG welded and STRESS RELEIVED. The rubber tips are replaceable. the YOKE's design allows it to be easily removed from heavy mud and silt. The Pole is all one piece of 1 1/4 fiberglass tubing, virtually unbreakable. Ultra Violet (UV) stable resins and coatings for years of service. O.D. green color for fishing or hunting. Wt.= 20ft. fully assembled one piece ready to fish @ 6.8 lbs. Flounder gig pole- custom designed pointed end accepts SS fish spear or "SEA STRIKER" gig. Push end has smaller yoke with rubber tips.

The HELMSMAN GUARANTEE--- If you break it, bring back the pieces
and we'll  give you another.

To order, for more information, or for a dealer near you, contact us @:

Captain Mike Helms
AMERICAN FINISHING CO.
CHARLOTTE, N.C.
704-596-8966
 e-mail us @   michaled@perigee.net

Dealer Inquiries Welcomed.

Call for free test push today.  Don't be up the creek without a Push Pole any longer!!

Why do I need  the Helmsman Push Pole, I don't even have a poling platform?  Because that trophy fish is just across that oyster bar and you can't get there from here without it!!

New prop    $300.00
Lower unit    $500.00
Water pump $250.00
AFTER you have to be towed back in.
 

To: COSFC Members
From: Kent Bolick                                           Date: Monday, July 22, 2002

Attention Members,                                          
 
Thank you for your interest in "baitlauncher".  The table and base are virtually indestructible.  The table is a FDA approved marine grade polymer with UV inhibitors to prevent yellowing. It is an excellent cutting board material and has side and back drainage for over the side of the boat. The base has a stainless platform welded to a 1 1/2 inch diameter stainless tube. The top attaches in seconds to the platform with stainless wing nuts. It is easily disassembled for storage or use on shore.  The standard design is made for a 30degree rod holder. This is what almost all boats have. (Other angles 15 or 0 degrees for example are available as well). The standard rod holder is approximately 8 to 9 inches deep.  We also offer a longer version (11 in.) for "heavy" or "long" rod holders.   Price is only about $89 plus shipping. Please let me know what other information would be helpful.

 
Attached are photos showing sizes 13x32, 13X27 & 13x20.   The price does not vary much by size. It really depends on what you need or think is appropriate for your boat and intended uses. These tables can be used for bait preparation, fish cleaning, and even as a serving tray. 

 Kent Bolick
 click here to return to Main Page
                       
                        

 BAITLAUNCHER

 SPECIAL BAIT PREPARATION AND FISH CLEANING TABLE

       DESIGNED TO FIT IN FLUSH MOUNTED ROD HOLDER

•  FDA APPROVED MARINE GRADE POLYMER TOP

•  UV INHIBITORS TO PREVENT YELLOWING

•   SLOTTED FOR OVERBOARD DRAINAGE

•  STURDY STAINLESS STEEL BASE

•  EASILY DISASSEMBLED FOR STORAGE
   ALL STAINLESS STEEL HARDWARE
   CAN BE USED ON SHORE 

•   HOLDERS FOR FILET KNIFE AND PLIERS

•    SIZES INCLUDE 13 X 20 , 13 X 27 AND 13 X 32 in.

•   STANDARD DESIGN IS FOR 30 DEGREE ROD HOLDER

•       NO ADJUSTMENT NECESSARY
  
   click here to return to Main Page

 TO ORDER OR FOR MORE INFORMATION PLEASE CONTACT US AT:

                    Atlantic Fishing Solutions
                    4205 Vista Knoll Drive
                    Burlington, NC 27215

                   e-mail: baitlauncher@aol.com
 click here to return to Main Page